TOA A-1712 mixer amplifier

Toa A1712 100V line mixer amplifier

Toa A1712 powered mixer is a basic mono 120 Watts (100V) PA amplifier with 4 mic channels suited for broadcasting, paging or background music in schools, offices or shops.

Toa A-1700 series

Toa microphone mixer amplifiers comprise models A-1706 (60 watt), A-1712 (120W) and A-1724 (240W).

Features

Multiple Inputs / Outputs: Featuring multiple mic inputs as well as three auxiliary inputs,the A-1700 Series of amplifiers have three different power ratings to select from depending on the venue. These units offer efficient mixing of as many as 9 different inputs. If more aux inputs are required, mic inputs 5 and 6 can be switched over to accept line level inputs.

2 Zone Capability: Each A-1700 Series amplifier has 2 speaker output zones which can be independently selected or used together for enhanced PA applications.

Phantom Power Provided: The A-1700 Series of amplifier provide phantom power to all connected microphones. Phantom power can switched on or off as needed. The microphone inputs feature a balanced configuration with XLR connectors, allowing long cable runs without any problems.

Equalization: Each amplifier allows easy tonal adjustment of all output signals with bass and treble controls.

Connecting External: For more sophisticated equalization such as minimizing feedback, a parametric equalizer or other gearcan be patched in before the power amplification stage. Other equipment such as a delay unit can also be connected if required. Alternately, to extend sound coverage, and additional power is needed to power other speakers, the line out terminal can be used to send the mix output to another power amplifier.

Remote Control Capability: A-1700 Series amplifiers will respond to remote control signals, allowing remote volume adjustments and remote power on/off.

Record Output: Each A-1700 Series amplifier back panel includes a record output for connecting an external recorder to archive or back up broadcasts.

Specification

Power Source AC mains 50/60Hz
Rated Output A-1706: 60W A-1712: 120W A-1724: 240W
Power Consumption A-1706: 150W (rated output), 60W (EN60065)
A-1712: 258W (rated output), 105W (EN60065)
A-1724: 532W (rated output), 220W (EN60065)
Frequency Response 50 - 20,000Hz (¡Þ3dB)
Input MIC 1 - 6: -60dB*, 600O, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack
AUX 1 - 2: -20dB*, 600O, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack (Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)
AUX 3 - 4: -20dB*, 10kO, unbalanced, RCA pin jack
AUX 5: -20dB*, 10kO, unbalanced, combined type of XLR-3-31 equivalent and phone jack
PWR AMP IN: 0dB*, 600O, unbalanced, RCA pin jack (An equalizer or other signal processor connectable between LINE OUT and PWR AMP IN terminals)
Output A-1706:REC: 0dB*, 600O, unbalanced, RCA pin jack
LINE: 0dB*, 600O, unbalanced, RCA pin jack
Speaker selector: 2 zone, high impedance (100V line/167O), individual selector key, M4 screw terminal
Direct speaker out: High impedance (100V line/167O), M4 screw terminal Low impedance (4 - 16O), M4 screw terminal
(Both Low and High impedance terminals cannot be used at the same time.)
A-1712: REC: 0dB*, 600O, unbalanced, RCA pin jack
LINE: 0dB*, 600O, unbalanced, RCA pin jack
Speaker selector: 2 zone, high impedance (100V line/83O), individual selector key, M4 screw terminal
Direct speaker out: High impedance (100V line/83O), M4 screw terminal Low impedance (4 - 16O), M4 screw terminal
(Both Low and High impedance terminals cannot be used at the same time.)
A-1724: REC: 0dB*, 600O, unbalanced, RCA pin jack
LINE: 0dB*, 600O, unbalanced, RCA pin jack
Speaker selector: 2 zone, high impedance (100V line/42O), individual selector key, M4 screw terminal
Direct speaker out: High impedance (100V line/42O), M4 screw terminal Low impedance (4 - 16O), M4 screw terminal
(Both Low and High impedance terminals cannot be used at the same time.)
Phantom Power ON or OFF for each MIC 1 - 6 with switch setting
S/N ratio (Band Pass:
20 ? 20,000Hz) Over 100dB (Master volume: min)
Over 76dB (Master volume: max)
Over 60dB (MIC 1 - MIC 4)
Tone Control Bass: ¡Þ10dB at 100Hz, Treble: ¡Þ10dB at 10kHz
Control Input REMOTE VOLUME: M3 screw terminal
POWER REMOTE: No-voltage make contact input, short-circuit: under 10mA, M3 screw terminal
Indicator 5 point LED output level meter,
Power indicator LED,
Zone indicator LED
Operating Temperature -10°C to +40°C
Finish Panel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions (W × H × D) 420 × 107.7 × 367mm
Weight A-1706: 9.3kg
A-1712: 12.6kg
A-1724:13.5kg
Accessory Power cord × 1,
Terminal block cover × 1,
Terminal block cover mounting screw × 2
Option Rack mounting bracket: MB-25B,
Volume control cover: YA-920

Specific accessories	Price ex. VAT

Page last updated:  Thursday 24 July 2008

Audio - amplifiers - mixer amps 100V line main page

Full Wedgwood product list with over 10,000 audio visual products

E. & O.E. www.wedgwood-group.com

How to order from Wedgwood

Payment options: bank transfer, cheque, debit card, credit card, 14 and 30 day credit accounts (see below).
No credit card surcharges.

Wedgwood only deliver to the UK mainland. To place an order then please fax your official purchase order to 0800 018 9968 (or 01754 768036), including your purchase order number, invoice/delivery address, goods, delivery charge, total including VAT and method of payment. We are unable to take telephone orders, but you can order online with our shopping cart.

If you are an educational establishment, government establishment, large registered charity or blue chip company and wish to pay by 14 or 30 day account please fax your official purchase order.

Please do not book installation of equipment before goods have arrived and have been fully tested. We accept no liability for installation or other cost occurred in the case of late delivery. Courier delays, manufacturer supply problems, etc, are beyond our responsible control.

Copyright © Wedgwood AV Ltd 1996-2007