GlassVu MSSi-USB-A USB to serial adaptor

GlassVu MSSi-USB-A

USB to serial adaptor. Picture shows the MSSi interactive through window touch screen for illustration only.

MSSi GlassVu

MSSi GlassVu interactive touch screen combines attention grabbing picture quality of GlassVu super contrast rear projection screen technology with an interactive membrane that enables your customers to respond to your screen content and interact with your business for as long as the system is on.

MSSi interactive touch screen technology is suitable for use with projection screen systems and also LCD and plasma screen technology. It is reliable, easy to install, and can be supplied in all screen sizes up to 80" (4:3) and 100" (16:9). You will need a rear projector to project your image onto the interactive touch screen (projector sold separately).

Specification

Format - MSSi GlassVu interactive touch screen technology for through window applications, ie fitted to existing window
Resolution - 50 lines per mm
Contrast ratio 500:1
H&V viewing angles 160 degrees - image can be seen clearly
H&V viewing angles 120 degrees - ideal condition for image
Projection angle No limitation for image to be seen
Projection angle - Projector on axis with the screen for ideal condition image
Colour reproduction - 16,000,000 colours / full colour
Ultra violet light - no susceptibility
Infra red light - No susceptibility
Detection method - projection capacitance technology using horizontal and vertical wires
Screen size - options available, 40-80-inch (4:3 format) or 40-100-inch (16:9 format as standard, other sizes on request as special order
Fixing options - Removable and permanent options available
Position accuracy - Approx 3mm absolute, 1mm relative, no drift
Alignment - Software drivers provide a calibration facility
Sensitivity - Can be programmed for different thickness of glass and even use with gloved hands. Standard configuration functions with non-metalise. Single construction glass 16mm thick. Double glazing option up to 25mm available (in this mode the manufacturer recommend only touch not the touch and drag function, see the PDF for more information on this double glazing option).
Speed or response - depends on glass thickness, typically 50 to 10ms
Output - RS232C communications to a 9 pin D female
Software compatibility - Drivers are available for Windows operating system
Temperature range - Bettern than -10 to +70 degree C
Humidity controller - 0 to 95% unaffected by condensation
Light transmission - depends on glass thickness, typically better than 85%
EMC: EN55022: 1998 + A1 + A2 EN55024: 1998 + A1 + A2. This device complies with Part 15 of the FCC Rules Operation is subejct to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please note you will need to let us know how you want your professional installation engineer to fix the interactive foil unit and the screen film layer, as there are fixing options available, removable or permanet, please see below for details.

Product includes

For through window application:
Interactive foil unit
GlassVu super contrast rear projection film layer
6m serial cable (longer lengths are available on request at additional cost)
CD software drivers and user manual

Fixing options:
Cling film for attaching to glass surfaces only, this is a removable fixing method (not suitable for fixing to acrylic)
Permanent optically clear acrylic adhesive applied to foil during manufacture, suitable for applying the foil to glass or acrylic surfaces.

DayVu screen technology range of products

GlassVu Super-Contrast rear projection screens comprise GlassVu 2 (wide angle) and GlassVu 3 (high brightness) which are available as film for applying direct to a window (professional installation recommended) or as a screen panel. For the film, the front face is adhesive so the film can be used only once and cannot be re-applied. Acrylic screen panels are with polished edges and radius corners. Brackets and accessories are available as extras and are subject to installation requirements.

GlassVu High Contrast film screen is applied by high quality tape around the four edges or by sandwiching between two substrates and as such can be re-used time and time again.

TransVu semi transparent film screen for rear projection application is flexible and can be cut to any shape or size. TransVu has an adhesive front face for application to any glass or acrylic surface and it cannot be re-applied once installed. TransVu is available in three levels of transparency, 0% complete opaque - not see through; 65% transparent, and 75% transparent - almost completely clear.

LumenStar High Contrast screen for front projection application, is supplied in specific screen sizes but if a larger size is required it can be tiled to make any size of screen the application calls for. LumenStar has the same high ambient high performance properties as GlassVu and is therefore ideal for out of home or studio lighting applications.

MirrorVu High Contrast film screen is a film screen for front and rear projection application.

GlassVu Window Film screens - caution

Due to the precise properties of the screen, please pay attention to the following guidelines:

Do not touch the screen with any hard objects
Avoid damage by fingernails
Do not allow oil-based products to come in contact with the screen
Do not use alcohol based cleaners
Please wipe any dust from the screen with a soft static-free cloth or brush

Terms and conditions of MSSi GlassVu interactive touch screen

Manufacturers warranty 12 months return to base excluding wilful damage
Manufacturer (MSS) will not accept responsibility of damage to screen elements or interactive unit during screen lamination process or installation process by a non-approved third party. We can give you MSS direct details for you to arrange installation (installation is at additional cost)
Customer is responsible for return to base shipping costs to the UK manufacturer should the interactive screen require repair

Please note Due to the importance of correct installation of these window film screens we STRONGLY ADVISE you have them installed professionally, as once purchased, screens cannot be replaced due to negligence, incorrect installation or damage by end user. Once purchased WE ARE NOT ABLE TO REFUND NOR ACCEPT RETURNS ON ANY SCREEN. Manufacturers 12 month warranty applies, which does not include wilful damage nor any problems to the screen/foil or any part of the product, due to installation or any other means.

Page last updated:  Thursday 24 July 2008

Projector screens - accessories main page

Full Wedgwood product list with over 10,000 audio visual products

E. & O.E. www.wedgwood-group.com

How to order from Wedgwood

Payment options: bank transfer, cheque, debit card, credit card, 14 and 30 day credit accounts (see below).
No credit card surcharges.

Wedgwood only deliver to the UK mainland. To place an order then please fax your official purchase order to 0800 018 9968 (or 01754 768036), including your purchase order number, invoice/delivery address, goods, delivery charge, total including VAT and method of payment. We are unable to take telephone orders, but you can order online with our shopping cart.

If you are an educational establishment, government establishment, large registered charity or blue chip company and wish to pay by 14 or 30 day account please fax your official purchase order.

Please do not book installation of equipment before goods have arrived and have been fully tested. We accept no liability for installation or other cost occurred in the case of late delivery. Courier delays, manufacturer supply problems, etc, are beyond our responsible control.

Copyright © Wedgwood AV Ltd 1996-2007